LC1D40-95

Auxiliary Contacts: 2 NO, Rated Operational Current: 10A, Block Mounting Position: Front, Contactor Relay Range: Tesys CAD/D/F

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

Auxiliary Contacts: 3 NO + 2 NC, Rated Operational Current: 10A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Set includes both the mechanical interlock and reversing connection kit, Contactor/Relay Range: TeSys LC1-D40A...D65A

Nominal Voltage: 180V, Nominal Torque: 130 Nm

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 80A, Power: 45KW/440V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Auxiliary contacts: 2 NO, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Side, Contactor Relay Range: Tesys Deca/Tesys D, IP2x, UL/CSA/IEC/EN

Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 128.000 kN

Main Contacts: 4 NO, Rated Operational Current: 25A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 9A, Power: 4KW/400V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5

Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 60A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment