HBC 2.5, s/n > H0211000

Main Contacts: 4 NO, Rated Operational Current: 25A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Rope Length: 29 m, Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay

Rope Length: 31 m, Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN

200-690V, For hoisting motors N1/N2/N3

Suitable for TeSys D09-D38 contactors, includes both mechanical and electrical interlocks.

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 12A, Power: 5.5kW/400V, Coil Voltage: 48V, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

42-48V, 50/60 Hz, not parameterized, display not included

Auxiliary Contacts: 2 NO, Rated Operational Current: 10A, Block Mounting Position: Front, Contactor Relay Range: Tesys CAD/D/F

Auxiliary contacts: 1 NO + 1 NC, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 43.800 kN, Complete Strand Designation: 8XK19S

Main Contacts: 4 NC, Thermal Current: 3A, Number of Steps: 2-step, Rated Operational Voltage: 240VAC, IP Class: IP66, 13 mm cable gland

For CXT & XN hoists, Nominal Voltage: 180V, Nominal Torque: 21 Nm

Suitable for old telemecanique D09-D25 contactors. Not suitable for TeSys D09-D25 contactors.

Material: Plastic, Color: Black, Includes retaining rings

Nominal Voltage: 300/500V, Cable Type: Pendant, Type: Power, Installation Type: Flexible, Number of Cores x Cross Section: 20x1.5 mm², Cable Material: PVC, Cable Certificate: IEC, Outer Diameter: 27x15.5 mm, Round cable with wires

Set of 6 pieces, Fixing parts for the connectors to install to the electrical cubicle

For XACA and PBX pendants, Color: Black

Suitable for Brakes: NM38730, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Sleeve clutch, Drive Axle Diameters: 25.5 mm, Nominal Torque: 7 Nm, Material: Steel, Surface Treatment: No surface treatment

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Auxiliary Contacts: 3 NO + 2 NC, Rated Operational Current: 10A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Auxiliary contacts: 2 NO + 2 NC, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 60A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Nominal Voltage: 180V, Nominal Torque: 42 Nm

Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN, Complete Strand Designation: 8XK19S

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

ControlPro-display

Auxiliary contacts: 4 NO, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

HBC 1.6

Suitable for Brakes: NM38720, NM38721, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Auxiliary Contacts: 3 NO + 2 NC, Rated Operational Current: 10A, Coil Voltage: 400VAC, Coil Frequency: 50/60Hz

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

HBC 5