ControlPro-display

Rope Length: 44 m, Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Set of fan and retaining rings, Material: Plastic, Color: Black

Assembly, For CXT2/CXT3, CXT6, CXT7

Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5

Rope Diameter: 11 mm, Drum Diameter: 406 mm, Rope Reeving Direction: Right

Set of 10 pieces

200-690V, For hoisting motors N1/N2/N3

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

Set of 6 pieces, Fixing parts for the connectors to install to the electrical cubicle

Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 128.000 kN

Supply Voltage/Brake Coil Voltage: NR2=>380-460/180, Brake Torque: 54 Nm/60 Nm, Includes Hub: Yes, Includes Screws: Yes, Complete brake assembly

Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Set includes cover for gear rim, screws and plugs, For CXT5, Diameter: 366 mm, Width: 81 mm, Color Code: RAL 7021

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

Poles: 4-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consists of 52271702, 52287834. ID's can be found from electrical drawings

Poles: 16-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consist of 52271702, 52287830. ID's can be found from electrical drawings

HBC 5

Poles: 10-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

Poles: 4/6/16-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

HBC 2.5, s/n > H0211000

Sleeve clutch, Drive Axle Diameters: 25.5 mm, Nominal Torque: 7 Nm, Material: Steel, Surface Treatment: No surface treatment

Drum bearing part for CXT5, 2 pieces needed for 1 drum

GEN3.FOR NORMAL BRAKE.I=04, I=05

Poles: 10-pole, Type: Female, Entry: Top, Cable Type: Round, Material: Plastic, Consist of 52294805, 52287838. ID's can be found from electrical drawings