Relay/thermistor board for D2V, slot B, varnished

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

Auxiliary contacts: 2 NO, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Side, Contactor Relay Range: Tesys Deca/Tesys D, IP2x, UL/CSA/IEC/EN

Main Contacts: 3 NO, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

24-48 VAC, D09-38 - RC-FILTER 24-48 VAC

Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 12A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 115A, Power: 59KW/440V, Coil Voltage: 48VAC, Coil Frequency: 50Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 80A, Power: 45KW/440V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings

200-690V, For hoisting motors N1/N2/N3

Auxiliary contacts: 1 NO + 1 NC, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Auxiliary Contacts: 3 NO + 2 NC, Rated Operational Current: 10A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 12A, Power: 5.5kW/400V, Coil Voltage: 48V, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Auxiliary contacts: 2 NO + 2 NC, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 125A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Auxiliary Contacts: 2 NO, Rated Operational Current: 10A, Block Mounting Position: Front, Contactor Relay Range: Tesys CAD/D/F

Nominal Voltage: 180V, Nominal Torque: 130 Nm

LC1D40-95