For XACA and PBX pendants, Color: Black

Suitable for Brakes: NM38730, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Set of 6 pieces, Fixing parts for the connectors to install to the electrical cubicle

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 12A, Power: 5.5kW/400V, Coil Voltage: 48V, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Poles: 10-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

Poles: 10+PE, Type: Male, Entry: Side, Cable Type: Flat, Material: Plastic

Poles: 4/6/16-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN, Complete Strand Designation: 8XK19S

200-690V, For hoisting motors N1/N2/N3

Assembly, For CXT2/CXT3, CXT6, CXT7

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Set of fan and retaining rings, Material: Plastic, Color: Black

Nominal Voltage: 180V, Nominal Torque: 42 Nm

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

Supply Voltage/Brake Coil Voltage: NR2=>380-460/180, Brake Torque: 54 Nm/60 Nm, Includes Hub: Yes, Includes Screws: Yes, Complete brake assembly

Poles: 10+PE, Type: Male, Nominal Current: 16A, 500V/IEC, 600V/UL/CSA, Screw terminal, For cubicle and plastic housing

Poles: 10+PE, Type: Female, Nominal Current: 16A, 500V/IEC, 600V/UL/CSA, Screw terminal, For cubicle and plastic housing

Poles: 4+PE, Type: Male, Nominal Current: 82A, 690V/IEC, 600V/UL/CSA, Screw terminal, For cubicle and plastic housing

Poles: 6+PE, Type: Male, Nominal Current: 35A, 500V/IEC, 600V/UL/CSA, Screw terminal, For cubicle and plastic housing

Set of 10 pieces

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

Poles: 16+PE, Type: Male, Nominal Current: 16A, 500V/IEC, 600V/UL/CSA, Screw terminal, For cubicle and plastic housing

Includes both the upper and lower part

Material: Plastic, Color: Black, Includes retaining rings

Poles: 10-pole, Type: Female, Entry: Top, Cable Type: Round, Material: Plastic, Consist of 52294805, 52287838. ID's can be found from electrical drawings

Poles: 10-pole, Type: Female, Entry: Top , Cable Type: Round, Material: Plastic, Consist of 52294805, 52287838. ID's can be found from electrical drawings. Rated operational Voltage: 400V, Rated Current: 16A

Poles: 16-pole, Type: Male, Entry: Side, Cable Type: Flat, Material: Plastic, Consist of 52271702, 52287831. ID's can be found from electrical drawings

HBC 1.6

Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment

Poles: 10-pole, Mounting/Cable Entry Type: Top, Cable Entry Size: PG21

ControlPro-display

Poles: 10+PE, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic

Rope Length: 29 m, Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay

Rope Length: 44 m, Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay

Rope Length: 31 m, Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN

Poles: 16+PE, Type: Female, Nominal Current: 16A, 500V/IEC, 600V/UL/CSA, Screw terminal, For cubicle and plastic housing

HBC 5

Set includes cover for gear rim, screws and plugs, For CXT5, Diameter: 366 mm, Width: 81 mm, Color Code: RAL 7021

Sleeve clutch, Drive Axle Diameters: 25.5 mm, Nominal Torque: 7 Nm, Material: Steel, Surface Treatment: No surface treatment

HBC 2.5, s/n > H0211000

For brake MF06 CB

Poles: 6-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consists of 52271702, 52287836. ID's can be found from electrical drawings

Poles: 4-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consists of 52271702, 52287834. ID's can be found from electrical drawings

Poles: 16-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consist of 52271702, 52287830. ID's can be found from electrical drawings

Correct size pins need to be ordered separately.