Main Contacts: 3 NO, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 60A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: TeSys CAD/D/F

Auxiliary contacts: 4 NO, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Auxiliary contacts: 1 NO + 1 NC, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Main Contacts: 4 NO, Rated Operational Current: 25A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Set includes both the mechanical interlock and reversing connection kit, Contactor/Relay Range: TeSys LC1-D40A...D65A

Sleeve clutch, Drive Axle Diameters: 25.5 mm, Nominal Torque: 7 Nm, Material: Steel, Surface Treatment: No surface treatment

Suitable for Brakes: NM38730, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Suitable for TeSys D09-D38 contactors, includes both mechanical and electrical interlocks.

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

Auxiliary contacts: 2 NO, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Side, Contactor Relay Range: Tesys Deca/Tesys D, IP2x, UL/CSA/IEC/EN

Set of fan and retaining rings, Material: Plastic, Color: Black

Main Contacts: 4 NC, Thermal Current: 3A, Number of Steps: 2-step, Rated Operational Voltage: 240VAC, IP Class: IP66, 13 mm cable gland

Includes 2 pieces and LAD9R3 reversing kit. Main Contacts: 3 NO, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Auxiliary Contacts: 2 NO, Rated Operational Current: 10A, Block Mounting Position: Front, Contactor Relay Range: Tesys CAD/D/F

For XACA and PBX pendants, Color: Black

200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5

Rope Diameter: 11 mm, Drum Diameter: 406 mm, Rope Reeving Direction: Right

Auxiliary Contacts: 3 NO + 2 NC, Rated Operational Current: 10A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

LC1D40-95

Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment

24-48 VAC, D09-38 - RC-FILTER 24-48 VAC

Nominal Voltage: 180V, Nominal Torque: 130 Nm

Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings

For brake MF06 CB

Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 128.000 kN

ControlPro-display

Amplifier for the strain gauge load sensor signal

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Main Contacts: 3 NO, Rated Operational Current: 32A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

HBC 2.5, s/n > H0211000

Rope Length: 43 m, Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

Main Contacts: 2 x 3 NO, Rated Operational Current: 25A, Power: 11kW/440V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 2 x 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 12A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

HBC 5

42-48V, 50/60 Hz, not parameterized, display not included

Main Contacts: 3 NO, Rated Operational Current: 80A, Power: 45KW/440V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

200-690V, For hoisting motors N1/N2/N3

Includes both the upper and lower part