Includes both the upper and lower part

200-690V, For hoisting motors N1/N2/N3

Auxiliary contacts: 2 NO, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Side, Contactor Relay Range: Tesys Deca/Tesys D, IP2x, UL/CSA/IEC/EN

Drum bearing part for CXT5, 2 pieces needed for 1 drum

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

Inner Diameter: 354 mm, Outer Diameter: 383 mm, Thickness: 12 mm, Material: Polyasetane

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

Diameter: 15 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 229.000 kN

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 60A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

Nominal Voltage: 180V, Nominal Torque: 130 Nm

Set includes cover for gear rim, screws and plugs, For CXT5, Diameter: 366 mm, Width: 81 mm, Color Code: RAL 7021

Sleeve clutch, Drive Axle Diameters: 25.5 mm, Nominal Torque: 7 Nm, Material: Steel, Surface Treatment: No surface treatment

Secondary Axle Diameter: 44.5 mm, Drive Axle Diameters: 44.5 mm, Nominal Torque: 97.6 Nm

Main Contacts: 3 NO, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

HBC 5

Main Contacts: 4 NO, Rated Operational Current: 25A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 128.000 kN

Amplifier for the strain gauge load sensor signal

Suitable for Brakes: NM38751, NM38752, NM38753, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

ControlPro-display

Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings

Set includes both the mechanical interlock and reversing connection kit, Contactor/Relay Range: TeSys LC1-D40A...D65A

200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5

Auxiliary Contacts: 2 NO, Rated Operational Current: 10A, Block Mounting Position: Front, Contactor Relay Range: Tesys CAD/D/F

Rope Diameter: 15 mm, Drum Diameter: 608 mm, Rope Reeving Direction: Right

Set includes 16 pieces of springs and 16 pieces of rivet nuts, Wire Diameter: 1,8 mm, Outer Diameter: 12,5 mm, Axial Length: 68 mm, Length: 644,32 mm, Material: Steel

GEN3.FOR NORMAL BRAKE.I=04, I=05

Nominal Voltage: 180V, Nominal Torque: 130 Nm

Rope Diameter: 11 mm, Drum Diameter: 406 mm, Rope Reeving Direction: Right

Set includes coupling, retaining rings and O-rings, Drive Axle Diameter: 40 mm, Nominal Torque: 110 Nm, Material: Steel

Color: Black, Includes retaining rings

GEN3.FOR NORMAL BRAKE.I=06, I=08

For brake MF06 CB

GEN4. I=04,I=05.INCL.52320129+52294834

LC1D40-95

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC