When autocomplete results are available use up and down arrows to review and enter to select. Touch device users

CONDITION MONITORING UNIT

Part Number 52292509
42-48V, 50/60 Hz, not parameterized, display not included
CONDITION MONITORING UNIT

CONDITION MONITORING UNIT

Part Number 52292509
42-48V, 50/60 Hz, not parameterized, display not included
Product Description
Product availability is limited

The product availability for the current offering of condition monitoring units (CID) is limited. There are options to replace the current products with the CID – ECU upgrade kits.

Please replace with the CID - ECU upgrade kit:

  • 69754566 UPGRADE KIT ECU-UPGR-STD-0-0-0-K (NOT Parameterized)

If there are 2-3 condition monitoring units (CID) in the same bus, you need to also order 1 piece or 2 pieces from the following:

  • 69811842 UPGRADE KIT 2-3 ECU-STD-0-0-0-K (NOT Parameterized)

Please note, the CID - ECU upgrade kit is not suitable for the following applications because ECU doesn’t support:

  • POW measurement
  • Serial communication (RS232)
  • Communication between CID and ECU

You can order the following products for these:

  • 69760518 CID048_POW_PARAMETRIZED

Can be checked from CID parameter: 4-7-1 is Motor

  • 69760520 CID048_PLC_ PARAMETRIZED (CPI and CXT smart)

Needs to be checked from electrical diagram

  • 69760522 CID048_MULTI_ PARAMETRIZED, (if the crane has 4 to 5 CID’s)

Can be checked from CID parameter: 4-11-1 Hoist cnt

Technical details
Weight
0.55 kg
0.55 kg
Recommended products
69760520 | CONDITION MONITORING UNIT
Only available if the original ControlPro uses RS232 serial link, e.g., for PC software (optional) or PLC system. Needs to be checked from electrical diagram. Work number and position code (HOIST A/B) needed for order text line. Control Voltage: 48V
Click for availability
Click for availability
69754566 | REPLACEMENT KIT
Master Pro retrofit kit to replace ControlPro. Designed for single hoists, no POW measurement, no modem, no parameters. Supports all control voltages, comes with instructions.
Click for availability
Click for availability
69760518 | CONDITION MONITORING UNIT
Only available if original ControlPro has POW Motor torque calculation measurements. Check from ControlPro Parameter. 4-7-1 is Motor. Work number and position code (HOIST A/B) needed for order text. Control Voltage: 48 V
Click for availability
Click for availability
69760522 | CONDITION MONITORING UNIT
Only available if 4 or 5 ControlPro’s are connected to same CAN bus. Can be checked from ControlPro parameter: 4-11-1 Hoist cnt. Work number and position code (HOIST A/B/C/D1/D2) needed for order text line. Control Voltage: 48V
Click for availability
Click for availability
66334589 | REPLACEMENT KIT
Master Pro retrofit kit to replace ControlPro. Parameterized. Designed for multi-hoisting, no POW measurement, no modem. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
Click for availability
Click for availability
69811842 | REPLACEMENT KIT
Master Pro retrofit kit to replace ControlPro. Designed for multi-hoisting, no POW measurement, no modem, no parameters. NOTE: When one ControlPro in a multi-hoisting system is replaced by a Master Pro, ALL ControlPro must be replaced!
Click for availability
Click for availability
60493999 | REPLACEMENT KIT
Master Pro retrofit kit to replace ControlPro. For cranes with ONE hoist (includes 1 Master Pro device) with parameters. No POW measurement. Supports all control voltages, comes with instructions.
Click for availability
Click for availability

You might also need these

60003098 | RECTIFIER
200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5
Click for availability
60026223 | CONTACTOR
Main Contacts: 2 NO + 2 NC, Rated Operational Current: 60A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz
Click for availability
52318371 | BRAKE
Supply Voltage/Brake Coil Voltage: NR2=>380-460/180, Brake Torque: 54 Nm/60 Nm, Includes Hub: Yes, Includes Screws: Yes, Complete brake assembly
Click for availability
52318372 | BRAKE
Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings
Click for availability
60010145 | RECTIFIER
200-690V, For hoisting motors N1/N2/N3
Click for availability
52292512 | DISPLAY
ControlPro-display
Click for availability
52314609 | BRAKE DISC SET
Suitable for Brakes: NM38730, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No
Click for availability
52314610 | BRAKE DISC SET
Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No
Click for availability
52296555 | CONTACTOR
Main Contacts: 3 NO, Rated Operational Current: 12A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC
Click for availability
MC0000965 | CONTACTOR
Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC
Click for availability
50003961 | LIMIT SWITCH
Main Contacts: 4 NC, Thermal Current: 3A, Number of Steps: 2-step, Rated Operational Voltage: 240VAC, IP Class: IP66, 13 mm cable gland
Click for availability
52309170 | AMPLIFIER
Amplifier for the strain gauge load sensor signal
Click for availability
52293298 | CURRENT TRANSFORMER
Click for availability

Interested? Please, contact us. We respond fast and are ready to help you.