Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 12A, Power: 5.5kW/400V, Coil Voltage: 48V, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Set includes coupling, retaining rings and O-rings, Drive Axle Diameter: 40 mm, Nominal Torque: 110 Nm, Material: Steel

Material: Polyurethane, Diameter: 100 mm, Length: 100 mm, Fixing Type: Center Bolt Connection, M12 , C = 40 mm

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 25A, Coil Voltage: 230VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Suitable for Brakes: NM38720, NM38721, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Rope Length: 44 m, Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay

Suitable for Brakes: NM38730, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

HBC 2.5, s/n > H0211000

Travel wheel set for hoist trolley, Diameter: 100 mm, Wheel type: Driving, Treatment: Standard

Main Contacts: 3 NO, Rated Operational Current: 12A, Power: 5.5KW/440V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 2 x 3 NO, Rated Operational Current: 12A, Power: 5.5kW/440V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 2 x 1 NO + 1 NC

Poles: 16-pole, Type: Male, Entry: Side, Cable Type: Flat, Material: Plastic, Consist of 52271702, 52287831. ID's can be found from electrical drawings

Poles: 4-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consists of 52271702, 52287834. ID's can be found from electrical drawings

Poles: 10-pole, Type: Female, Entry: Top, Cable Type: Round, Material: Plastic, Consist of 52294805, 52287838. ID's can be found from electrical drawings

Main Contacts: 4 NC, Thermal Current: 3A, Number of Steps: 2-step, Rated Operational Voltage: 240VAC, IP Class: IP66, 13 mm cable gland

Nominal Voltage: 180V, Nominal Torque: 42 Nm

GEN2.NORMAL BRAKE.I=04,I=05.INCL.52307105+52281368 Includes two gasket versions (A&B). Check original and use same type gasket as a spare part.

Rope Length: 29 m, Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay

Nominal Voltage: 300/500V, Cable Type: Pendant, Type: Power, Installation Type: Flexible, Number of Cores x Cross Section: 20x1.5 mm², Cable Material: PVC, Cable Certificate: IEC, Outer Diameter: 27x15.5 mm, Round cable with wires

Includes both the upper and lower part

Set includes cover for gear rim, screws and plugs, For CXT5, Diameter: 366 mm, Width: 81 mm, Color Code: RAL 7021

Set of 6 pieces, Fixing parts for the connectors to install to the electrical cubicle

Assembly, For CXT2/CXT3, CXT6, CXT7

ControlPro-display

Auxiliary contacts: 2 NO + 2 NC, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Poles: 15-pole, Type: Male/Female, For XL Hoists

Poles: 4/6/16-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

Poles: 10-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

Drum bearing part for CXT4, 2 pieces needed for 1 drum

Emergency STOP, Diameter: 40 mm, Color: Red, Turn to release/trigger/latching, IP Class: IP65, Material: Plastic collar, XACA, IEC/EN

200-690V, For hoisting motors N1/N2/N3

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Fan cover, Color Code: Black Grey, RAL 7021

For XACA and PBX pendants, Color: Green

Rope Diameter: 8 mm, Drum Diameter: 355 mm, Rope Reeving Direction: Right

Rope Length: 43 m, Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN

Rope Length: 31 m, Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN

For XACA and PBX pendants, Color: Black

Rope Length: 46 m, Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay

Main Contacts: 3 NO, Rated Operational Current: 9A, Power: 4KW/400V, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Travel wheel set for hoist trolley, Diameter: 100 mm, Wheel type: Idle, Treatment: Standard

Secondary Axle Diameter: 44.5 mm, Drive Axle Diameters: 44.5 mm, Nominal Torque: 97.6 Nm

HBC 5

GEN3.FOR NORMAL BRAKE.I=04, I=05

Set of 2 pieces, Deep groove ball bearing dimensions, Outer Diameter: 52 mm, Inner Diameter: 25 mm, Width: 15 mm, Material: Steel

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

For XACA and PBX pendants, Color: White

For brake MF06 CB

Poles: 16-pole, Type: Female, Entry: Side, Cable Type: Flat, Material: Plastic, Consist of 52271702, 52287830. ID's can be found from electrical drawings

Poles: 15-pole, Type: Female, For XL Hoists

HBC 1.6

Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 43.800 kN, Complete Strand Designation: 8XK19S

Supply Voltage/Brake Coil Voltage: NR2=>380-460/180, Brake Torque: 54 Nm/60 Nm, Includes Hub: Yes, Includes Screws: Yes, Complete brake assembly

Direction contact block, 2-step

Auxiliary contacts: 4 NO, rated operational current: 10A, block mounting position: front, contactor relay range: Tesys CAD/D/F

Rope Diameter: 6 mm, Drum Diameter: 303 mm, Rope Reeving Direction: Right

Diameter: 6.20 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 36.200 kN

Main Contacts: 3 NO, Rated Operational Current: 12A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Drum bearing part for CXT2/CXT3, 2 pieces needed for 1 drum

GEN1.FOR NORMAL BRAKE.

Material: Plastic, Color: Black, Includes retaining rings

Suitable for TeSys D09-D38 contactors, includes both mechanical and electrical interlocks.

Rotor 52481890

Auxiliary Contacts: 2 NO, Rated Operational Current: 10A, Block Mounting Position: Front, Contactor Relay Range: Tesys CAD/D/F

P2, 380-415V/50Hz, 440-480V/60Hz, Rotor 52481680

Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN, Complete Strand Designation: 8XK19S

Set includes cover for gear rim, screws and plugs, For CXT2/CXT3, Diameter: 250 mm, Width: 58 mm, Material: ABS, Color Code: RAL 7021

N207/1, Wire Diameter: 1,4 mm, Outer Diameter: 11,4 mm, Axial Length: 58 mm, Length: 533,8 mm, Material: Steel