For brake MF06 CB

Diameter: 8 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 68.940 kN, Complete Strand Designation: 8XK19S

For CXT & XN hoists, Nominal Voltage: 180V, Nominal Torque: 21 Nm

Material: Plastic, Color: Black, Includes retaining rings

HBC 5

Secondary Axle Diameter: 30.75 mm, Drive Axle Diameters: 30.75 mm, Nominal Torque: 20.9 Nm, Surface Treatment: No surface treatment

42-48V, 50/60 Hz, not parameterized, display not included

Poles: 4/6/16-pole, Mounting/Cable Entry Type: Side, Cable Entry Size: PG21

Setting Range: 0.1…3s, Main Contacts: 1 NO + 1 NC, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Front, Relay Range: Tesys CAD/D/F

Rope Diameter: 8 mm, Drum Diameter: 355 mm, Rope Reeving Direction: Right

HBC 2.5, s/n > H0211000

Set of 6 pieces, Fixing parts for the connectors to install to the electrical cubicle

Includes both the upper and lower part

Suitable for TeSys D09-D38 contactors, includes mechanical interlock.

Assembly, For CXT2/CXT3, CXT6, CXT7

Nominal Voltage: 180V, Nominal Torque: 42 Nm

Main Contacts: 4 NC, Thermal Current: 3A, Number of Steps: 2-step, Rated Operational Voltage: 240VAC, IP Class: IP66, 13 mm cable gland

Secondary Axle Diameter: 56.52 mm, Drive Axle Diameters: 56.52 mm, Nominal Torque: 46.7 Nm, Surface Treatment: No surface treatment

Nominal Voltage: 180VDC, Nominal Torque: 100 Nm, Includes: Brake Wheel, Hub, Screws and Retaining Rings

Supply Voltage/Brake Coil Voltage: NR2=>380-460/180, Brake Torque: 54 Nm/60 Nm, Includes Hub: Yes, Includes Screws: Yes, Complete brake assembly

Rope Length: 29 m, Diameter: 6.40 mm, Lay Type and Direction: Left Hand Ordinary Lay

HBC 1.6

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 60A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz

For XACA and PBX pendants, Color: Black

Sleeve clutch, Drive Axle Diameters: 25.5 mm, Nominal Torque: 7 Nm, Material: Steel, Surface Treatment: No surface treatment

Diameter: 11 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 128.000 kN

200-690V, For hoisting motors N1/N2/N3

Suitable for Brakes: NM38741, NM38740, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Main Contacts: 3 NO, Rated Operational Current: 12A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 12A, Power: 5.5kW/400V, Coil Voltage: 48V, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Main Contacts: 3 NO, Rated Operational Current: 9A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

200-690V, Output Current/Power: 1.5ADC, Hoisting motors N4/N5

Rope Diameter: 6 mm, Drum Diameter: 303 mm, Rope Reeving Direction: Right

Amplifier for the strain gauge load sensor signal

Suitable for Brakes: NM38730, Includes Brake Wheel: Yes, Includes Hub: Yes, Includes Screws: No

Rope Diameter: 11 mm, Drum Diameter: 406 mm, Rope Reeving Direction: Right

Main Contacts: 2 NO + 2 NC, Rated Operational Current: 40A, Coil Voltage: 48VAC, Coil Frequency: 50/60Hz, Auxiliary Contacts: 1 NO + 1 NC

Auxiliary contacts: 2 NO, Rated Operational Current: 10A, Rated Operational Voltage: 690VAC, Block Mounting Position: Side, Contactor Relay Range: Tesys Deca/Tesys D, IP2x, UL/CSA/IEC/EN